Smart Lighting | Human Centric Lighting (HCL) | Internet of Things (IoT) | Lighting Control | Ceiling Lights | Table/Floor Lamps | Wall Lights | Outdoor Lights | Commercial Ceiling Lights | Desk Lamps | Downlights | High Bay Lights | Street Lights | Flood Lights | Sports Lighting | Solar Lighting | Horticulture Lighting | Vehicle Lighting | Stage Lighting | Flashlights | LED Strip Lights | Lamps | LED | OLED
Vehicle driving lamp product information
Cars and lorries have a variety of lights or driving lamps, some of these are used to light the interior of the vehicle and others for lighting the road ahead or letting other drivers know that you are braking. Whenever you refer to driving lamps the first thing that most people will think about is a vehicle's headlights.Headlights are an important part of your vehicle and you need to ensure that they are always in good working order. It is an offence to drive a vehicle that has faulty headlights as defective lighting in the dark or in weather conditions where visibility is poor, can lead to road accidents. Headlamps not only allow the driver to see the road ahead, they also let other drivers know that a vehicle is approaching on the opposite side of the road.
The first cars came into existence at the end of the nineteenth century, and these used acetylene or oil lamps, the oil was practical because it resisted wind and rain. The first electric headlights were developed in 1898 and very quickly became an industry standard, however, these lights had to be manually adjusted and a driver would often have to get out of the car in bad weather to readjust the position of the headlights. Dipped headlights came into being sometime later and these are now an integral part of every vehicle, when headlights are not dipped this can blind drivers coming in the opposite direction and the result can be an accident. The driver needs to be fully awake and aware of the driving environment to determine what level of light is needed.
Beam headlights are used on many vehicles as they tend to be less obstructive of other drivers' vision. When the lights are on high beam it allows the driver to see a longer distance in front, low beams are used for shorter distances. Vehicles are also fitted with fog lights, which are designed to be used in circumstances where visibility is very low. There have been many changes in vehicle head lamps over the years including the shape of the lights. Car headlamps used to be round but they are now oval shaped. Headlamps come in pairs and they are electrically operated from inside the vehicle and can usually be adjusted from the vehicle's dashboard.
Some driving lamps have a greater tendency to create an unsafe glare than others. If your car is fitted with high intensity discharge lamps, which use xenon gas, you need to be aware of this tendency. These lamps produce a small amount of light to begin with, then as the car gets going and the lamps warm up the light becomes stronger. If you have these lights on your car then you should also have leveling control and a lens cleaning system, which are designed to eradicate an unsafe glare.
All vehicles are fitted with two brake lights at the rear, sometimes there are three as one is placed in the window. You should always get someone to check your brake lights for you before you embark on a long journey as defective brake lights are the cause of many accidents. Your brake lights are designed to signal to the driver in front when you are slowing down and when you are speeding up again. The brake light switch is automatically operated by your brake pedal. When you put your foot down on the brake pedal to slow down or stop it activates a switch at the back of the pedal, letting other drivers know what you are doing.
There's no product listing here. Be the first to submit your Vehicle driving lamp information.
Related information
- Aftermarket headlight
- Car brake lamp
- Car halogen bulb
- Car headlamp assembly
- Car taillight
- Car Xenon HID light
- Daytime running lamp
- Fog lamp
- HID headlight
- LED headlamp
- Parking lamp
- Roadway lighting
- Sealed beam headlight
- Side marker light
- Tail lamp
- Turn signal lamp
- Vehicle corner light
- Vehicle cornering lamp
Halogen and incandescent bulbs are commonly used in car headlight. HID lamps have become very popular recently.
All automobiles in Europe and North America are required to have a car brake lamp on both sides of the rear bumper.
Car halogen bulbs are ten times brighter than incandescent bulbs and hundred times more efficient in illumination.
A car headlamp assembly is an important safety feature of automobiles, providing illumination for nighttime driving.
The car taillight or rear position light is use to signal when the driver is braking, reversing, or turning.
Xenon HID headlamps for automobiles and trucks offer brighter, whiter, forward facing vehicle lighting.
An automotive daytime running lamp is an important component of the overall lighting system of roadway vehicles.
Aside from the headlamps and rear lights, it is also essential that your car has a fog lamp that works properly.
A vehicle HID headlight uses a fused quartz bulb containing a xenon-mercury gas and two tungsten electrodes.
The light bulbs in LED headlamps emit a brighter light than the incandescent bulbs and consume less power.
The parking lamp and parking sensor will make you visible to other drivers and signal to them your intentions.
Roadway lighting increases road safety by illuminating roadways, such as freeways, carparks, and roundabouts.
Sealed beam headlights are a type of forward illumination headlamp attached to the front of automobiles and trucks.
Car side marker lights contribute to the general visibility of a vehicle, together with other conspicuity devices.
The tail lamp allows your vehicle to be visible to the other drivers especially in areas without much light.
A turn signal lamp makes other people aware of your vehicle's current condition or the direction you are heading to.
Car corner lights act as a safety tool for the drivers. The car corner light works together with the turn signal.
The cornering lamps or cornering lights of your vehicle are activated whenever the turn signals are switched on.